Upgrade Your Current Cylinder Stand to Seismic Level – No Replacement Required
High‑pressure gas cylinders present a serious safety risk during earthquakes if not properly secured. The Proseven Biomass Seismic Pads for Gas Cylinder Stands are specifically engineered to prevent tipping and sliding of cylinder stands during strong ground motion, while allowing facilities to continue using their existing cylinder stands—with no drilling, no anchors, and no permanent installation.
During earthquakes, unsecured gas cylinders may topple or shift, leading to:
While chain fixation or anchor systems are commonly used, they are often impractical in rented buildings, cleanrooms, or facilities that prohibit floor drilling. Proseven’s biomass seismic pads solve this problem by creating a high‑friction, energy‑absorbing interface between the stand and the floor.
Many laboratories, hospitals, and factories already use cylinder stands that meet everyday safety needs but offer limited resistance against strong earthquakes. Replacing all existing stands can be costly, time‑consuming, and operationally disruptive.
The Proseven Biomass Seismic Pads provide a simpler alternative:
This upgrade concept resonates strongly with international customers focused on ROI and operational continuity.
Rather than functioning as a standalone stand, this product enhances the seismic stability of conventional single‑cylinder stands by creating a high‑friction, energy‑absorbing interface between the stand base and the floor.
This makes it an ideal solution for facilities seeking cost‑effective seismic upgrades and for distributors looking to add a high‑value safety accessory to their product lineup.
The pads are installed on the base of a cylinder stand, where they function as:
Unlike rigid fixation methods, the gel material absorbs and disperses seismic energy instead of transferring it directly to the stand structure.
◆Specifications◆
For overseas distributors, the Biomass Seismic Pad offers:
It is a low‑risk, high‑impact addition to any industrial safety portfolio.
“Seismic Performance as an Upgrade, Not a Replacement“
View the cylinder stand equipped with seismic pads 👉
How to remove the pads?
Cylinder stands are quite heavy.
When you need to remove the pads attached to the bottom, it is convenient to use Proseven’s Air‑UP.
By inserting it under the base and inflating it, the stand can be lifted easily.
For removing the pads themselves, insert a spatula moistened with disinfectant ethanol between the pad and the floor at several points, and they will come off smoothly.
The pads are made from a proprietary urethane gel that combines:
•Friction based adhesive force
•Controlled flexibility to follow ground motion
•Ultra low rebound characteristics
This balance allows the stand to remain stable during strong shaking while avoiding damage to floors or equipment.
Shake table tests were conducted using input motion equivalent to Japan Meteorological Agency (JMA) seismic intensity level 7, the most severe class on Japan’s scale, amplified by 20% (×1.2).
This testing approach provides a globally understandable benchmark for seismic reliability.
The pads incorporate plant derived biomass materials, helping to reduce CO₂ emissions while maintaining industrial grade performance.
•Free from specified hazardous substances
•Conformant with RoHS 2 (EU)
•Suitable for organizations with ESG or sustainability policies
BFT-1004BG-S
3 mm thick pad ensures stable support for the heavy stand.